Ruckus-wireless MM2211 Bedienungsanleitung PDF herunterladen (Seite 20)

20 MM2211 Wireless Broadband Gateway User’s Guide 8000013, July 2006

Wireless Settings Worksheet

Before you modify any wireless settings on the MM2211 Gateway, print Table 4— “Wireless Network

Settings Worksheet” and record the following information about your wireless network. Your ISP or network

administrator may provide you with this information. The wireless information recorded in this worksheet

should be used to configure the MM2211 Gateway’s wireless settings.

Table 4—Wireless Network Settings Worksheet

Item Description and Your Network Setting

MM2211 Gateway SSID

The SSID identifies the remote AP. Make sure to specify the SSID of the Mesh

Networks Router, or the SSID as defined by the Metro ISP provider.Once you

obtain the SSID from the Metro ISP provider, this is the value you must enter as the

MM2211 Gateway SSID. You can use up to 32 alphanumeric characters. The SSID

is case sensitive.

Security If using WEP, circle the method used: [Open System] [Shared Key] [Auto}

Circle the type of Shared key: 64-bit 128 bit

Passphrase method

• If using 64-bit WEP: use 10 hex digits (any combination of 0-9 or a-f) or 5

ascii characters

• If using 128-bit WEP, use 26 hex digits or 13 ascii characters

The WEP key values are not case-sensitive.

Key 1 ______________________________________________

Key 2 ______________________________________________

Key 3 ______________________________________________

Key 4 ______________________________________________

If using WPA-PSK, write down the passphrase. The WPA-PSK passphrase is

case-sensitive.

WPA Passphrase: ________________________________

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

Keine Kommentare

Ruckus-wireless MM2211 Bedienungsanleitung Seite 20